Hand Tools Page 1

KTC286 & KTC285 Spring Return Wire Twisters



 

Widely used to “lock” nuts, bolts, oil filters, etc., in place preventing them from loosening or falling off. Very simple to use. Lock the pliers on both ends of the wire and pull the knob to spin the twister. The wire twister also has a handy wire cutter built right in.

KTC286 9" Spring return twister Price:$23.00
KTC285 6" Spring return twister Price:$23.00

KTC291
11 Piece
Deburring Set



Handle holds all “S” type blades, which are used for cutting and deburring on aluminum, plastic and steel. Supplied with 10 blades.
Price: $15.00

AN Wrench


CNC precision machined, color anodized and laser etched for fast and easy identification. Each wrench has a 90 degree and a 15 degree opening. The short handles help make it difficult to over tighten the fittings.

KTC629-3 – 3 AN Wrench  Price:$22.00
KTC629-4 – 4 AN Wrench  Price:$22.00
KTC629-6 – 6 AN Wrench  Price:$22.00
KTC629-8 – 8 AN Wrench  Price:$22.00
KTC629A 5 Piece AN Wrench Set:
Price: $116.00
Incl. – 3, – 4, – 6, – 8, – 10
KTC629B 8 Piece AN Wrench Set:
Incl. – 3, – 4, – 6, – 8, – 10, – 12, – 16, – 20
Price: $199.00
KTC629-10 – 10 AN Wrench Price:$28.00
KTC629-12 – 12 AN Wrench Price:$29.00
KTC629-16 – 16 AN Wrench Price:$29.00
KTC629-20 – 20 AN Wrench Price:$33.00
 

KTC583 & KTC584 Safety Wire Handy Twister






Available in 6" and 18" lengths, these simple twisters can be operated with just one hand and will work in confined, hard to reach areas that are inaccessible to the automatic wire twisters.

KTC583 18" Handy Twister Price: $8.00
KTC584 6" Handy Twister Price: $7.00

KTC292
Multi-Purpose
Deburring Kit

Includes a thread cleaner blade, O-ring groove blade, rotodrive countersink, external rotodrive countersink, fine tip blade and 1/2" hex aluminum handle. Price: $56.00

KTC329
Tubing Bender

3-in-1, 180° tubing bender for copper, mild steel and aluminum tubing. Will not collapse or kink - (not for thick wall material). Bends 1/4", 5/16" and 3/8". 11-1/4" OAL Price: $29.00
 

KTC330
Tubing Cutter

Heavy duty tubing cutter, will cut copper, mild steel and aluminum tubing 1/8" to 1-1/8" O.D. Price: $9.00

Aircraft Safety Wire



Made of MS-20995C stainless steel and conforms to mil spec W6713. This wire is used widely in aviation and automotive applications.

KTC287 .032" diameter -  Price: $9.00
used on oil filters, nuts, bolts, etc.
KTC288 .041" diameter - Price: $9.00
used on propellers, turn buckles, etc.
KTC289 .020" diameter - Price: $ 9.00
 used on electrical connectors, instruments, etc.

Solid Carbide Burrs

Part No		Shape	Size	Price
KTC298		Chamfer	1/4" x 1/4"	$9.00
KTC299		Ball	1/4" x 1/4"	$10.00
KTC300		Cylindrical	1/4" x 1/4"	$10.00
KTC301		Tree	1/4" x 1/4"	$11.00
KTC302		Tree	3/8" x 1/4"	$13.00
KTC303		Cone	1/4" x 1/4"	$11.00
KTC304		Cylindrical	3/16" x 1/4"	$9.00
KTC305		Olive	1/4 "x 1/4"	$12.00
KTC306		Cone	1/4" x 1/4"	$12.00
KTC307		Pointed	1/4" x 1/4"	$12.00
KTC308		Flame	5/16" x 1/4"	$14.00
KTC309		Flame	1/2" x 1/4"	$15.00
KTC297 - Carbide Burr Set - Includes all 12 burrs listed above plus a beautiful wooden storage box. Price: $140.00

KTC441
4 Piece Getta-Grip™ Pliers Kit

Includes a 7" lineman’s pliers, 6" diagonal cutter, 6" slip joint and 6" long nose pliers. Comfortable TPR Getta-Grip™ handles.
Price: $20.00

KTC293
Double Burr
Deburring Tool

This tool has a double burr, hand guard and 2 N80 blades. Quickly and efficiently deburrs both sides of the sheet metal edge with a single stroke. As the blade dulls simply rotate to a new cutting edge. Price:$22.00

KTC331
Mini Tubing Cutter

Gets into close tight areas on mild steel, copper and aluminum tubing 1/8" to 5/8".  Price: $6.00

KTC442 & KTC443  Long Nose Loc
king Pliers

Made of high grade chrome vanadium steel, nickel plated for durability and comes with cushion grips.
KTC442 6" OAL Price: $11.00
KTC443 8" OAL Price: $12.00

6 Flute Chatterless Countersinks


          

 

100° high speed steel with 1/4" shank.
KTC295 5/16" diameter Price: $7.00
KTC296 3/8" diameter Price: $7.00

KTC505
 37º Tube Flaring Tool

This outstanding tube flaring tool is designed to be used on soft materials like copper and aluminum alloys. It makes a perfect flare and it burnishes as it flares. This is the tool that will work on your 1/8" primer lines and everything else up to 3/4". Actual sizes are 1/8", 3/16", 1/4", 5/16", 3/8", 1/2", 5/8" and 3/4". This is a one piece tool - no parts to misplace or lose. Price: $106.00

Locking C-Clamp w/Swivel Pads

Swivel pads hold tapered pieces during awkward fabrication jobs and delicate projects without damaging the work surface. Guarded trigger will release quickly, which unlocks the clamp and protects from accidental release.

KTC444 6" OAL - Jaw adjustment 0" - 1" - 1/8" Price: $20.00
KTC445 11" OAL - Jaw adjustment 0" - 3" - 1/16" Price: $29.00
KTC446 18" OAL - Jaw adjustment 0" - 8" - 1/4" Price: $39.00

Speed Deburring Tool


 

A fast and clean deburring of your drilled holes is accomplished with the simple swivel action of this tool. It has a 1/4" x 28 threaded holder. The speed driver will also accept threaded drill bits and countersink cutter pilots.

KTC575 Speed Deburring Tool Price: $22.00
KTC575C 100 Degree Deburring Bit Price:$10
KTC575K - Kit Includes KTC575 and KTC575C  Price: $29.00

KTC332
Portable Hand Punch


 

Will punch a 1/4" diameter hole through 16 gauge steel. This tool is capable of producing 1.2 tons of force. It comes with 7" round hole punch and dies for 3/32" to 9/32" holes. Price: $24.00

Vise Grip Locking Pliers




 

Fast release, curved jaw locking plier is 2 times easier to open, has more finger room and a “no pinch” release. It is ideal for tightening, clamping, twisting and turning. The turn screw on the handle adjusts pressure being applied to the work piece. They are constructed of high-grade heat treated alloy steel and have hardened teeth that are designed to grip from any angle. Long nose model allows easy access in narrow, hard to reach places. It is idea for both precision work and hobbies.

Handi-Burr Tools





                      
                                               Blade
 

For fast and efficient deburring of both sides of the hole with a single pass. These tools have replaceable blades and a tension adjustment to control the edge break.

KTC644 - Handi-Burr Kit - Our Handi-Burr kit contains four deburring tools in the most popular sizes: 3/32", 1/8", 5/32", 3/16", plus a replacement blade for each tool. Everything is stored in a handy box for safety and convenience. Price: $299.00

KTC438
Brass Pin & Punch Set



 

Non-sparking, solid brass punches designed to help prevent damage to the work piece. Contains 1 ea. of 1/4" x 4" and 3/8" x 6" pin punch and a 1/2" x 8" drift punch.
Price$ 25.00

KTC333
Standard Center Punch


 

Built with a large knob on the end for comfort during operation. This tool has a hardened tip for long life. Simply press against the material and punch will automatically snap and create the dimple in the material. Price$ 7.00

KTC449
Locking Welding Clamp

Designed to hold round, angled or flat work for welding. The “U” shaped jaws provide enhanced visibility and greater working space. Jaw adjustment .000" to 2-3/32", 9" OAL Price: $30.00

Burr-Zit Deburring Tool

Designed for higher production, automated operation. The open-slot design of this “closepin tool” allows the chips to clear easily. Cleanly de-burrs both the front and back sides of the hole in a single pass. 4" OAL
Recommended Speed - Ferrous Metals 40-50 SFM  Recommended Speed -Non-Ferrous Metals 80-90 SFM

KTC334
Heavy Duty Center Punch



 

Just press the tip onto the job and an internal spring loaded hammer will snap, delivering a blow and producing the center punch. The force of the blow is fully adjustable. Price$ 8.00

KTC586
Hand Seamer

Designed with 1" deep and 3-1/2" wide jaws, this hand seamer is ideal for making any short bends in areas like ribs, bulkheads and duct work. The tool has a heavy cushioned handle for comfort. Price$ 22.00

KTC669
Burnishing Tool

Designed to remove surface blemishes, wrinkles and scratches on sheet-metal and is very easy to use. It’s supplied with the large plastic handle for great control as well as comfort, and has a polished, chrome plated blade for smooth results. Price$ 15.00

KTC310
Edge Rolling Tool

Used to pre-bend skin edges on lap joints before riveting. An edge roll prevents the skin from curling up while riveting. Nylon rollers prevent damage to the skin while rolling the edge. 2 spare rollers are included.
Price$ 22.00

KAT100
1/4" Mini Air Ratchet Wrench

This mini air ratchet wrench is all needle and ball bearing constructed, has a comfort grip body, air regulator and rear exhaust. 200 rpm free speed, 20 ft. lbs max, 5-20 ft. working range, 7" OAL, 0.5 lbs. Price$ 70.00

KTC335
Gasket Punch Kit

Easy to use, will punch a clean hole in soft materials such as leather, thin plastics, rubber, paper, etc. Ideal for making gaskets. The kit includes 10 punches and a carrying case. Punch sizes are: 1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 3/4", 7/8" and 1". Price$ 24.00

KTC311 - Circle Cutter (Fly Cutter)


The circle cutter produces precision circles in sheet metal, brass, copper, plastics and other materials. The body is constructed of heat treated tool steel for durability. It has replaceable cutters and pilot drills which are made of high speed steel for long life and clean cuts. A hex wrench is included to adjust the cut from 1" to 6" diameters. You can also adjust the depth of the cut. Rated at 500 rpm for safe operation and it has a 3/8" round shank for the drill motor. We highly recommend using this tool in a drill press whenever possible. Price: $24.00

KTC311-1 Replacement cutter blade
Price$ 6.00
KTC311-2 Replacement pilot drill bit
Price$3.00

KAT101 3/8" Air Ratchet Wrench

Needle bearing construction with a comfort grip handle, built in air regulator, rear exhaust and a swivel air inlet. 150 rpm, 50 ft. lbs max, 10-50 ft. working range, 10" OAL, 2.5 lbs.
Price$70.00

KTC336
Nylon Tie Wrap Tool



Hold and tightens the cable ties and cuts off the excess. Cuts up to 1/4" wide tie wraps.
Price$ 14.00

KTC336-1 7" cable ties - package of 100
Price$ 4.00
KTC336-2 4" cable ties - package of 100
Price$ 3.00

KAT109
 Adjustable Clutch Screwdriver

Well balanced tool with a comfort grip, ergonomic handle, variable speed trigger and a reverse lever on top of the tool. 1800 rpm, 10-90 inch lb range, 8" OAL, 1.3 lbs.
Price$ 102.00

KTC337
Cable Cutter

Sharp, hardened and precision ground cutting edges, the angular blades are designed to cleanly cut wire ropes, steel cables and sheathed wire rope without fraying the ends. Made of a special tool steel and hardened for durability. Rubber grips for comfort. 3/16" capacity, 8" OAL
Price$25.00

KTC312
 Super Nibbler

Permits curved and circular cuts, unaffected by chips. It leaves a clean burr free cut edge on all types of sheet metal, aluminum, copper, plastics etc. Plastic grips for comfort. 10-1/2" OAL, approx 1.25 lbs. Price$ 39.00

KTC313
Nibbler Cutting Tool



Cuts sheet metal up to 18 gauge steel, aluminum, plastics and copper up to 1/16". Ideal for making cuts in the center of sheets for instruments. Price:$ 20.00

KTC313-1 Replacement blade for KTC313 nibbler.Price $14.00

KAT110
Adjustable Clutch Screwdriver

Well balanced tool with a comfort grip, ergonomic handle, variable speed trigger and a reverse lever on the top of the tool. 800 rpm, 10-110 inch lb torque range, 10" OAL, 1.4 lbs.
Price $125.00

Cable Swaging Tool

This is a precision machined product of high grade, hardened steel. It has been plated for maximum rust protection and pre-lubed for working ease. Use a wrench to tighten the grade 8 bolts. This is a super tool for “setting” your copper oval sleeves on your cables. Very often used in aviation and sailboat applications.

KTC511 - fits 1/16", 3/32" and 1/8" cables (7" OAL)
Price$22.00
KTC512 - fits 1/8", 5/32", 3/16" and 1/4" cables (14" OAL) Price$49.00

Copper Oval Sleeves
KTC513 1/16" oval sleeve Price $0.15
KTC514 3/32" oval sleeve  Price $0.25
KTC515 1/8" oval sleeve Price $0.40
KTC516 5/32" oval sleeve Price $0.55
KTC517 3/16" oval sleeve Price $1.10
KTC518 1/4" oval sleeve Price $1.50

Aviation Snips

Cuts mild steel, aluminum, and plastics etc. An old time favorite snip for many mechanics.

KTC314 Red grip, cuts to the left
Price$ 7.00
KTC315 Yellow grip, cuts straight
Price $7.00
KTC316 Green grip, cuts to the right
Price $7.00

Screwdriver Bits

1" OAL x 1/4" hex, these insert bits are made of S2 modified steel and heat treated for a long life.

Upright Aviation Snip

The unique design for fine snips keeps your hand above the metals surface for faster, easier and safer cutting. With the blades set at a 90 degree angle from the handle, working straight away or overhead is much easier than conventional snips. Both left and right snips also cut straight.

KTC605 Cuts right and straight   Price:$30.00
KTC606 Cuts left and straight 
 Price:$30.00

KTC566
Screwdriver Bit Set

A complete kit with a multi-position handle for straight, 45 degree and 90 degree turning, a ratcheting head, two bit extensions, 95 assorted bits and a convenient storage case. The bits include Phillips, slotted, square, Prince & Reed, torx, spline, hex, Robertson, clutch, tri-wing, torq-set, spanner, metric hex, tamper proof torx, tamper proof metric and SAE hex.
  Price:$55.00

KTC338
Ratcheting
Terminal Crimper

Heavy duty crimping tool for insulated wire terminals. Ratchet action makes crimping both fast and easy.   Price$ 29.00
Use for wire sizes:
AWG22 - 18 (red terminals)
AWG16 - 14 (blue terminals)
AWG12 - 10 (yellow terminals)

KTC359
Wire Stripper

Simply dial the wire size desired for individual or repetitive stripping without damaging the wire. The handles spring open for fast and easy cutting or stripping. Locks closed to protect the hardened cutting edges. Vinyl cushion grips on the handles. Wire gauge capacities as follows: 12, 14, 16, 18, 20, 22, 24 and 26.   Price:$12.00

Offset Snip

Ideal snips for making straight and curved cuts. The unique features of these snips are the angle of cut, which keeps your hand up and out of the way of the passing cut edges. You will not get any “pucker” marks in your cuts like with the aviation snips. Another great feature is that both snips cut straight as well as either left or right. 9-1/2" OAL 18 gauge steel and 22 gauge stainless steel. These snips require 25% less force to operate than conventional snips.

KTC499 Cuts straight and right
  Price$19.00
KTC500 Cuts straight and left
  Price$19.00

Screw Removal Tool

This is probably the finest screw removal tool ever made, and is routinely used by mechanics in NASCAR shops, industrial plants, in support of our Presidential Fleet, as well as by the Thunderbird and Blue Angel flight teams and many, many others. It is heat treated, plated and built to last a lifetime. It doesn’t matter what type of screw it is, Phillips, tri-wing or high-torque or anything else, this tool will remove it. The handle folds for convenient storage and has a built in compartment to house your assortment of screwdriver bits. Operates with a standard ratchet wrench or breaker bar. Removing aircraft windshields and fuel tanks are now a breeze.

KTC645 Screw Removal Tool - Removes #8 to 1/4" screws, 17" OAL, 3lbs. 3 oz.
  Price$380.00
KTC646 Large Screw Removal Tool - Removes 1/4" to 3/8" screws 18-3/4" OAL, 4lbs. 8oz.
  Price$390.00

KTC582
Cannon Plug
(electrical connector) Plier

Designed to efficiently remove A-N (cannon plug) connectors without crushing them. It’s adjustable from 3/4" to 2-1/2".   Price$22.00

KTC582A Replacement Jaws   Price$8.00

KTC222
Camloc Pliers

High quality pliers designed to work with all 2600, 2700 and 4002 series studs. Price:$15.00

Tubing Beader

In order to securely attach a hose to rigid aluminum tubing, it is first necessary to “bead” the tubing which raises a bump or “bead” all around the outside diameter of the tube. Simply slide the hose on the tube and over the bead and tighten the hose clamp. This locks the hose to the tube, eliminating it from pulling loose or leaking.

KTC590-3/8 For 3/8" O.D. tubing
Price:$38.00
KTC590-1/2 For 1/2" O.D. tubing
Price:$44.00
KTC590-5/8 For 5/8" O.D. tubing
Price:$52.00
KTC590-3/4 For 3/4" O.D. tubing
Price:$59.00
KTC590-1 For 1" O.D tubing
Price:$73.00

KTC339
Jewelers Screwdrivers

High quality screwdrivers ideal for hobbyists, technicians, mechanics and do-it-yourselfers. Also used by avionic technicians etc. Screwdrivers are nickel plated with swivel heads. Sizes included, .100, .080, .070, .055, .040, .025 and are all marked as to their sizes. 3-7/8" OAL. Plastic case is included. Conforms to GGG-S1808 government specifications. Price:$21.00