Hand Tools  Page 2

KTC340
9 in 1 Multi Tool Driver

Features 6 bits and 3 nut drivers, the most common sizes, all stored inside the tool in a unique stacking configuration. The ProTouch™ grip provides both comfort and slip resistance for maximum torque. Includes: 3/8", 5/16", 1/4" sockets, 2 slotted bits, 2 Phillips screwdriver bits and 2 square bits. $13.00

KTC597
Acid Brushes



 

Ideal for use with or without solvents for cleaning small parts or for applying adhesives or lubricants. Brushes are 5-3/4" OAL with 3/4" long bristles.

KTC597A  3/8" Wide Brush   $1.00
KTC597B  9/16" Wide Brush  $1.00

T-Dollies

T-Dollies are commonly used to form flanges and edges by hammering (with a wood slapper) metal over the rounded dollie which is being held in a vise or hand held. Available in 3 sizes for 3 different crowns.

KTC409 - 1/2" diameter x 4"
$28.00
KTC410 - 3/4" diameter x 6"
$32.00
KTC411 - 1" diameter x 8"   
$33.00

KTC341
 O-ring Hook
and Scribe Set



 

This 2-piece hook and scribe set has many uses, including cleaning small parts, scribing metal, picking 0-rings and retrieving small parts from hard to reach places. Contains 1-pc combination hook and pick and 1 90° pick and straight pick.  $5.00

KTC351
Cold Heat™ Pro
Soldering Tool

The patented Cold Heat™ system melts solder instantly and is cool in just seconds. Has the power to tin wire as large as 12 gauge or join wire from 18 to 25 gauge. Averages 700 solder joints per pack of 5 AA alkaline batteries. It has a built in bright white LED work light and comes complete with CHT3 chisel tip, protective cap and a storage case. Batteries not included.
  $54.00

KTC412
Handy T-Dollie

Heavy enough to use as a traditional hand held dollie yet excellent as a vice held T-Dollie. It is especially helpful when working with a large piece of metal that requires a curved edge.  
* Upper “T” section is 1" dia. x 3-1/4" long
* Post is 6-1/2" long x 1-1/4" wide
* Zinc plated for long life
* Drilled to hang for storage
$28.00

KTC342
4 Piece Mini Hook
 and Pick Set

Designed to easily remove O-rings and seals, cotter pins and a number of other tasks. Each hook and pick is made of stainless steel with a plastic handle for ease of grip and comfort. Contains: 1 combination pick, 1 90° pick, 1 straight pick and hooked pick.  $5.00

KTC352
 Heavy Duty
 Soldering Gun

200/100 watt, 3 position trigger control (high, low, off). Heats in just 5 seconds, 3 quick tips (soldering, cutting, and smoothing). Temperatures up to 1130o F and it has a great built in work light and a handy storage case. $59.00

     Curved T-Dollies
           

Custom metal workers know that hand formed edges are not always straight as on tanks and interior parts. Projects like hood scoops, fender flairs and many other body mods often need parts that will be joined along a curved shape. These custom curved T-Dollies are just the tool to make the project go easier and faster.

KTC414 - Gentle Curve - 8" bar x 1" diameter (curved side to side)  
$49.00
KTC415 - Crescent - 8" bar x 1" diameter (Curved from top view) 
$46.00
KTC416 - Slope - 8" bar x 1" diameter (1" end curve down)  
$47.00
 

KTC343
Bearing Packer

Simply place the bearing between the plastic cones, tighten and apply grease through the fitting on the end of the threaded shaft. Forces out old grease and evenly injects fresh grease. Cone diameter is 4-1/2".  $11.00

KTC377
Heat Gun

Comes with a break resistant mica heating element. It has replaceable brushes and an adjustable air intake regulator to control the temperature within the units range. It has a toggle switch for hot, cold and off, plus it comes with a circular safety stand.
$115.00
 

KTC413
 Curved Handy
 T-Dolly

The curved “Handy T-Dolly” is beautifully machined and formed with a 7" radius arc. Ideal for use when forming wheel wells etc.
$32.00

KTC344
Pro Series Grease Gun


Variable stroke delivers high pressure on demand. Heavy duty cast aluminum head, filler nipple and air bleeder. 12" extension and can be loaded 3 ways.
$60.00

Ratcheting Tap Handles

Three position gear box for quick, efficient ratcheting action. Designed for use with taps, reamers, screw extractors and other tools with square shanks.

KTC650 - Ratcheting Tap Handle 0" - 1/4"
$28.00
KTC651 - Ratcheting Tap Handle 1/4" - 1/2"
$29.00
 

KTC428
 7 Piece Auto Body
Repair Tool Set

7 Piece Auto Body Repair Tool Set Includes: 1 Utility Dolly, 1 Curved , 1 Heel Dolly, 1 Toe Dolly, 1 Pick & Finishing Hammer, 1 Light Striking Hammer, 1 Standard Bumping Hammer, 1 Carrying Case $110.00
 

KTC601
“Flush Fitting” Mini Grease Gun


 

This mini size grease gun was designed to get into those hard to reach flush fittings.
It takes a standard 3 oz. grease cartridge, has a heavy duty die cast head and stainless steel body. This tool is very easy to use with one hand. $14.00

KTC345 Power
Grease Gun


 

Air operated, fully automatic, this tool continuously dispenses grease while the trigger is engaged. Up to 6000 psi air pressure. $95.00

KTC346  7 Piece Lubrication Accessory Kit

A complete selection of adapters and extensions that work with all standard grease guns. Includes: Press on 90° fitting, straight extension, 12" hose extension, slide-on 90° coupler, rubber tipped nozzle, needle nozzle and a 360° coupler.
  $140.00

KTC65
Ball Hex Wrench Set

Both metric and fractional wrenches are included in this set. The ball end tips allow easy access up to a 25 degree angle. There are 13 fractional sizes from .050" to 3/8" and 9 metric sizes from 1.5mm to 10mm. All 22 pieces are held firmly in a sturdy reusable case. $29.00

Forming Dollies

Hand held forming dollies are used at one point or another when forming sheet-metal parts for automotive, aviation and motorcycle applications. A wide range of shapes and sizes are available to fit the job. The highly polished work surfaces will help in creating a quality part.

KTC418
Thin Toe Dolly
$21.00


KTC421
Utility Dolly
$23.00


KTC424
Anvil Dolly
$29.00

KTC427
Shrinking Dolly
$24.00

KTC419
Grid Dolly
$22.00


KTC422
Curved Dolly
$23.00



KTC425
Dome Dolly
$26.00


KTC420
Double End Hand Dolly
$23.00


KTC423
Heel Dolly
$21.00

KTC426
Toe Dolly
$24.00

All dollies are of drop-forged medium carbon steel, heat treated, ground, painted and polished to a high standard.

KTC654
X-Beam Ratcheting Combination Wrench Set

The new X-Beam wrench allows you to apply force to the flat surface of the wrench, reducing hand fatigue. The ratcheting box end only requires a 5 degree arc swing. The open end features Surface Drive Plus for a stronger grip on fasteners while delivering up to 25% more torque. The ends, box and open end, are actually twisted 90 degrees from each other, exposing the wide, flat handle surface for your hand to push or pull against, as opposed to the narrow side. 9 piece set, 5/16" - 3/4". $155.00
 

KTC347
9" Siphon Blow Gun

Marvel air tool oil is a formulated, high grade lubricating oil for all piston and rotary type air tools. Lubricates and rust proofs for better performance and longer tool life.
$16.00

Dead Blow Hammer



The safest, non-marring, non-sparking hammers available. Made of high quality materials for a long life. The head is filled with lead shot for maximum force and no bounce. This is an ideal tool for general shop use.

KTC602 - 1 lb. Hammer (Yellow)
$27.00
KTC602A - 1-1/2 lb. Hammer (Orange)
$29.00

Marvel Air Tool Oil




Marvel air tool oil is a formulated, high grade lubricating oil for all piston and rotary type air tools. Lubricates and rust proofs for better performance and longer tool life.

KTC509 4 oz. air tool oil      $2.00
KTC510 1 quart air tool oil   $4.00

KTC348
5 Piece Air Blow Gun

Used for clearing chips and debris from machinery and work benches. Also can be used for drying glues, paints or solvents. The kit comes with a blow gun and brass tip, safety tip, rubber tip and a needle tip. This one kit will do it all.
$8.00

KTC490
Tool Pouch



 

Made of heavy duty material, this is an ideal pouch to carry your tools on the job, in the shop, aircraft, car or boat. It has a heavy duty zipper a full length pocket on both the inside and outside, reinforced bottom and heavy carrying straps.
$16.00

KTC349
Aluminum Pocket
Blow Gun

Small and light weight - supplied with a pocket clip. Simply twist to increase or decrease the air flow $5.00

Body Hammers

Almost all sheet-metal fabrication and customizing jobs will require the use of body hammers and dollies. Here we have
selected a wide range of the most popular and commonly used hammers for your consideration. Each hammer has a specific shape or use. They are precision machined and the working surfaces are highly polished where required, whether for roughing, finishing, stretching or shrinking.

KTC429
Reverse Curve Body Hammer
  $21.00

 

KTC430
Heavy Shrinking Body Hammer $22.00


 

KTC431
Standard Bumping Body Hammer
  $21.00

KTC432
Straight Pin & Finishing Body Hammer
  $21.00


 

KTC433
 Light Shrinking Body Hammer
  $22.00


 

KTC434
Curved Pin & finishing Body Hammer
  $21.00


 

KTC435
Standard Bumping
Body Hammer $22.00


 

KTC436
Light Bumping Body Hammer
  $21.00

KTC437
Pick and Finishing Body Hammer
  $21.00
Try using these high quality hammers with our forming dollies for professional results.

Air Couplers and Plugs



Male Couplers
Part #   Series  Thread Size
KTC382    1/4"       1/4" MPT   $6.00
KTC383    1/4"       3/8" MPT  $6.00
KTC384    3/8"       3/8" MPT  $9.00


Female Coupler
Part #    Series  Thread Size
KTC385     1/4"         1/4" FPT   $6.00
KTC386     1/4"         3/8" FPT  $6.00
KTC387    3/8"          3/8" FPT  $10.00

Male Plug
Part #    Series  Thread Size
KTC388     1/4"       1/4" MPT  $2.00
KTC389     1/4"       3/8" MPT  $2.00
KTC390     3/8"       3/8" MP    $3.00


Female Plug
Part #    Series  Thread Size
KTC391      1/4"        1/4" FPT   $2.00
KTC392      1/4"        3/8" FPT  $3.00
KTC393      3/8"        3/8" FPT  $3.00

KTC565
 Mini Vacuum

Designed as a small light weight tool with plenty of power. This vacuum uses 90 to 120 psi and creates enough vacuum to pick up nuts, bolts, rivets, chips, dust etc. This is a great shop tool as well as a handy vacuum to clean up in the cock pit or in other confined areas.   $31.00

Blocking Hammer

Well-planned design and excellent quality have made these hammers extremely helpful to quickly beat metal into shape before planishing. The highly polished heads minimize marks left on the metal. Machined of 4340 plus heat treating, combine to make them exceptionally durable. They all come with heavy duty, comfort grip fiberglass handles and each hammer has a high and low crown to choose from. The heads are 5-3/4" long, ideal for working deep sections.

KTC394 - 45 oz, 1-1/2" dia. $149.00
KTC395 - 35 oz, 1-3/8" dia. $133.00
KTC396 - 24 oz.,1-1/8" dia. $119.00

Air Tool Hose

Made of rugged, oil resistant neoprene. The high strength, rayon cord braided body has a maximum pressure of 200 psi. Both ends have a 1/4" MPT fittings.

KTC507 - 1/4" I.D. x 25'  $13.00
KTC508 - 1/4" I.D. x 50'  $22.00

Bossing Mallets

Designed with an extra deep reach make these mallets a “must have” item for all types of metal working projects. Use with a shot bag to shape metal. Each mallet has 2 radii for your choice, and the heads are made of non-marring plastic for long life. Very sturdy, genuine hickory handles are also part of these great tools.

KTC397 - 2" Face Diameter, 7" Head Length, 12 oz.                                  $41.00
KTC398 - 2-3/4" Face Diameter, 8" Head Length, 23 oz.,                    $43.00
KTC399 - 3" Face Diameter, 7" Head Length, 26 oz.                                   $46.00

KTC647 
Air Inlet Cap

 

This is a small, lightweight, convenient and inexpensive air tool accessory that will help prevent dirt or other contaminates from entering the tool. It stays with the tool at all times and simply slips on or off the air fitting when you use the tool or put it away. Most contaminates are picked up when the tool is stored on the work bench or in your tool box, but if you slip the Air Inlet Cap over the air fitting, you will eliminate that problem. Fits all standard 1/4" air tool fittings.  $1.25

Plastic Barrel Mallets

May be used as is, or easily reshaped to suit the project at hand. Made of non-marring plastic for long life, with a sturdy hickory handle.

KTC400 - 2-12/" Face Diameter, 4-7/8" Head Length, 19 oz.                        $23.00
KTC401 - 2-3/4 Face Diameter, 5" Head Length, 24 oz.                        $29.00
KTC402 - 3" Face Diameter, 6" Head Length, 30 oz.                                      $31.00

KTC648
M-Pact Gloves


 

High performance, multi-purpose gloves with a host of features including an anatomically shaped, die cut, multi-layered synthetic leather palm with EVA interior foam padding and knuckle panels for shock absorption. This is just one of the many features of the glove that is so highly valued by both the weekend and professional mechanic. Available in 4 sizes. Yellow/Black.

KTC648-1  Medium         $43.00
KTC648-2  Large            $43.00
KTC648-3  Extra Large  $43.00
KTC648-4  2X Large       $43.00

KTC403
Lead Shot Bag



 

Our bags are made of thick top grain cowhide for extreme durability and long life. They have a suede outer finish and a tanned inner surface for blemish free metal work. Each bag is double stitched with a leather binding around the edge. A heavily reinforced flap with a Velcro® closure system is used to retain the filler. #9 lead shot or children’s play sand is recommended. 12" diameter x 1-1/2" - 2" thick when filled. Item is sold less filling (shot or sand).
$34.00

KTC403-8 - 8"x 1-1/2" thick when filled. $32.00

KTC649
Mechanic Gloves



 

This is the very best all around, multi-purpose glove available. It provides superior fit and control, while affording excellent dexterity and protection. Mechanix Wear Original Gloves are used by more professional mechanics than any other glove in the world. Features include: an easy entry elastic cuff, form fitting spandex top, index finger reinforcement band, long life Clarine synthetic leather fingertips and palms. Available in 4 sizes. Yellow/Black.

KTC649-1  Medium         $29.00
KTC649-2  Large            $29.00
KTC649-3  Extra Large   $29.00
KTC649-4  2X Large      $29.00

Hard Wood Slappers

 

These high quality wood slappers are made from grade A select Midwestern hard maple for strength and durability. They are available in flat, gentle, curved and round. All except the round come with a leather face (the round does not need one).

KTC404 - Flat Slapper, 14" OAL, 8-1/4" x 2-1/2" W                                   $68.00
KTC405 - Gentle Slapper, 14" OAL, 8*1/4" x 2-1/2" W                               $68.00
KTC406 - Curved Slapper, 14" OAL, 8*1/4" x 2-1/2" W                             $68.00
KTC407 - Round Slapper, 14" OAL, 8*1/4" x 2-1/2" W                                $63.00
KTC408 Replacement Leather Face 
                                              $18.00

KTC350
Touch Up Spray Gun



Spray gun and cup, ideal for touch up, edging, shading, or detailed painting.
  $54.00

KTC607
Preval
Spray Gun

Preval is by far the handiest liquid sprayer you can have at the shop or in your home. It is completely self contained and will easily spray water, paint, lacquer, solvents, stains, oil, cleaners, etc. It is very easy to use and simple to clean. Just fill the glass jar with liquid, screw on the can of propellant and you are ready to spray. Each can of propellant is capable of spraying up to 16 oz. of liquid and is disposable when spent. Keep extra jars on hand for additional liquids. Clean up is simply a matter of a couple of squirts of a cleaning solvent or water, depending on the product that was being sprayed.

KTC607  Preval Power Unit  $5.00
KTC607A  Glass Container    $2.00