 |
|
Eckold
|
|
|
HF80CHK
Eckold Handformer
This is a
manually operated machine which is suitable for shrinking,
stretching, punching, notching and edging in metal sheets
and profiles up to 16 ga. It is supplied with a set of
FWA405SSP shrinker and FWR407SSP Stretcher jaws. Many other
optional jaws are
available. $3,400
Specifications:
Reach x Gap ...........................3" R x 2-1/4"
G
Capacity:
Steel ..................................................
0.059
Aluminum .........................................
0.078
Stainless Steel ..................................... 0.039
Adj. Working Height ......... 32-1/2" to 44-1/2"
Weight .............................................. 53
lbs.
Shipping Weight ............................... 69
lbs.
Available Jaws
Shrinking Jaws
FWA405SSP (STD) $880.00
HSA40ASSP Beaked $2684.00
HLFA70SSP Nomar $2526.00
HLA60SSP Nomar Beaked $$4219.00
HLR60SSP Nomar Beaked $4,641.00
Stretching Jaws
FWR407SSP (STD) $880.00
HSR60SSP Beaked $2,608.00
HLFR70SSP Nomar $2,502.00
Speciality Jaws
LSW1SSP Punching Jaws $828.00
AK250 Edging Jaws $799.00
ASW42SSP Notching Jaws $1,194.00
Optional
HF80CH - PA80 - Handformer with Pneumatic Drive Unit
Note: Comes with FWA405SSP Shrinker and FWR407SSP Stretcher
Jaws and foot pedal Assembly. $5,625.00
PA80 - Pneumatic Drive Unit Only
$2,146.00
|
Eckold KF324
& KF330 Piccolo Kraftformer
Both the KF324 and KF330 are
driven by an electric motor at 400 strokes per minute.
(specify voltage when ordering). The KF324 has a hand wheel
for the jaw pressure adjustment while the KF330 is adjusted
by an electro-mechanical foot pedal. The jaws can be
replaced in a matter of seconds so that you can quickly
change from task to task. Mounted on heavy duty casters
allows you to move the units around the shop or out of the
way when not in use. These units are extremely popular in
auto restoration and fabrication shops, as well as
throughout the aviation industry. All tooling must be
ordered separately.
KF324
-
POA
KF330
-
POA
Specifications
Reach x Gap ..........................14" R x 9-1/2" G
Capacity:
Steel .....................................................
0.078
Aluminum ............................................. 0.098
Stainless Steel ........................................
0.059
Working Height
...........................................45"
(Slightly Adjustable) Weight
.................................................970 lbs.
Shipping Weight ...............................1,125 lbs.
|
Available Jaws
Shrinking Jaws
FWA402S 40 mm $1,556.00
FWA502S 50 mm $1,690.00
FWA602S 60 mm $1,711.00
LFA70S Nomar 40 x 70 mm $2,130.00
LFA90S Nomar 55 x 90 mm $2.872.00
LFA120S Nomar 70 x 120 mm $4.131.00
KS50S Beaked - $6,503.00
Doming Jaws
PFW60S 60mm $2,716.00
PFW80S 80mm $2,727.00
Stretching Jaws
FWR403S 40 mm $1,603.00
FWR603S 60 mm $1,711.00
LFR70S Nomar 40 x 70 mm $2,131.00
LFR90S Nomar 55 x 90 mm $3,527.00
SW2S 60 mm $4,766.00
Planishing Jaws
TP25S 85/25 mm $1,561.00
Straightening Jaws
RWS 80 x 150 mm (Lower Part) $5,245.00
RW-TP25S (Upper Part) $691.00
RW-WT80S (Upper Part) $1,153.00
Flattening Jaws
FWS60S 60 mm $2,806.00
LFS60S Nomar 60 mm $2,921.00
|
|
|
Eckold
MZ20 and MZ30 Mobileformer
Flanging Tools
The
Eckold Mobileformers are flanging tools designed to flange
the ends of cylinders, vessels, and tanks. They achieve this
by using a portable hydraulically powered machine and a
remote hydraulic pump. Dies or inserts are made to fit your
applications and a wide range of shapes and sizes are
available.
Eckold offers several Mobileformers to choose
from with material capacities ranging from .0787" thick to
.5906" thick in steel. Please contact us for more detailed
information or for a quotation on your specific
requirements.
Larger capacity units are available
Please Inquire
MZ-20
-
$9,200.00
MZ-30 - $14,750.00 |
|
|
Eckold GL2
Portable
Planishing Hammer
The Eckold GL2
planishing hammer is essential for the manual forming of
sheet metal. It can be used in auto body and motorcycle
repair, manufacturing or customizing or anywhere sheet metal
has to be formed into a particular shape. Even seams can be
flattened and smoothed by planishing. Being air operated,
lightweight and fully portable, the GL2 is ideal for both
bench work or “on the vehicle” jobs. It is supplied with an
air hose, tool rack and 3 hammer inserts for planishing,
stretching and curving. Optional Dollies Available.
Weight approximately 4 1/2 lbs.
$1,618.00 |
|
|
HZ51
Hand Plier
|
Manually operated, plier type tool
which can be used for 3 different ranges of applications. By
simply changing the jaws, shrinking, stretching or clinching
operations can be achieved. Clinching is the joining of 2
sheets of metal without using rivets, bolts, staples, welds,
etc. Jaws are not included and must be ordered separately.
Call for more information regarding clinching tooling.
$1,348.00
Specifications
Capacity:
Steel...................................................
0.039
Aluminum .......................................... 0.059
Weight Approximately .........................10 lbs.
Available Jaws
FWA405 (STD) Shrinking Jaw
$727.00
FWR407 (STD) Stretching Jaw
$727.00
HLFA70 Nomar Shrinking Jaw
$2,526 .00
HLFR70 Nomar Stretching Jaw
$2,502.00 |
|
|
KF460 & KF665
 KF460
KF665
The
KF460 is the second largest Kraftformer in the Eckold line,
and the KF665 is the largest. Both are electronically
operated and extremely sturdy and durable and can deliver
great pressure combined with very sensitive control. Their
high degree of versatility is due to the very wide range of
quick change tooling. All tooling must be ordered
separately.
Specify required voltage when ordering.
KF460
POA
KF665
POA
Specifications KF460
Reach x Gap ...........................18" R x 18-1/2" G
Capacity
Steel..........................................................0.118
Aluminum
.................................................0.157
Stainless Steel
...........................................0.079
Shipping Weight ...................................3,170 lbs
Specifications KF665
Reach x Gap .................... 26-1/2" R x 17-3/4" G
Capacity
Steel
........................................................
0.236
Aluminum.................................................
0.315
Stainless Steel ...........................................
0.157
Shipping Weight .................................
5,500 lbs
Tooling listed below will fit either the KF460 or KF665
unless otherwise specified.
Available Jaws
Shrinking Jaws
FWA402S 40 mm $1,556.00
FWA502S 50 mm $1,690.00
FWA602S 60 mm $1,711.00
FWA802T 80 mm $2,941.00
FWA1002T 100 mm $3,087.00
FWA802/3T 80 mm $3,419.00
FWA602/4X 80/60 mm $3,527.00
FWA802/4X 80 mm - $3,369.00
FWA1002/4X 100 mm $4,024.00
FWA1306X (KF665 Only)
LFA70S Nomar 40 x 70 $2,130.00
LFA90S Nomar 55 x 90S $2,872.00
LFA120S Nomar 10 x 120 $4,131.00
LFA150S Nomar 80 x 150 - POA
KS50S Beaked $6,503.00
KSL60S Nomar Beaked $8,017.00
KSL80T Nomar 340 x 220 x 280 mm $8.260.00
Stretcher Jaws
FWR403S 40 mm $1,603.00
FWR603S 60 mm $1,711.00
FWR803T 80 mm $2,901.00
FWR1003T 100 mm $3,233.00
FWR803/3T 80 mm - POA
FWR803/4X 80 mm - POA
FWR1003/4X 100 mm $4,024.00
FWR1307X 130 mm (KF665
Only)
$6,922
LFR90S Nomar 55 x 90 mm $3,527.00
KSLR80T Nomar 340 x 220 x 280 $8,260.00
SW2S 60 mm $4,766.00
SW4T 95 mm (KF665
Only) $5,908.00
Planishing Jaws
TP25S 65/25 mm $1,561.00
Flattening Jaws
FWS60S 60 mm $2,806.00
FWS80T 80 mm $3,731.00
Doming Jaws
PFW60S 60 mm $2,716.00
PFW80S 80 mm $2,272.00
PFW100T 100 mm $3,236.00
PFW150X 150 mm (KF665 Only) $4,453.00 |
|
|
KF340
Eckold Kraftformer
This is the
newest machine in the great line of Eckold Kraftformers. The
new KF340 has an adjustable operating speed from 250 to 550
strokes per minute. We have found the lower speeds to be
ideal for shrinking and straightening, while the higher
speeds are best suited for stretching, doming and planishing.
The unit has ample power to work steel up to .118" and
aluminum to .157" thicknesses. The foot pedal adjusts the
jaw pressure and also has an emergency stop function. As
with all Eckold machines, the new KF340 has a quick change
jaw feature and accepts all the jaws and accessories used
with the KF324 and KF330 machines.
POA
Specifications
Reach x Gap ..........................14" R x 9-1/2" G
Capacity:
Steel
........................................................0.118
Aluminum ...............................................
0.157
Stainless Steel ........................................
0.079
Working Height
...........................................45"
(Slightly Adjustable)Weight
..............................................1,180 lbs.
Shipping Weight ...............................1,335 lbs.
Available Jaws
Shrinking Jaws
FWA402S 40 mm $1,556.00
FWA502S 50 mm $1,690.00
FWA602S 60 mm $1,711.00
LFA70S Nomar 40 x 70 mm $2,130.00
LFA90S Nomar 55 x 90 mm $2,872.00
LFA120S Nomar 70
x 120mm
$4.131.00
KS50S Beaked $6,503.00
Doming Jaws
PFW60S 60mm $2,716.00
PFW80S 80mm $2,727.00
Stretching Jaws
FWR403S 40 mm $1,603.00
FWR603S 60 mm/ $1,711.00
LFR70S Nomar 40 x 70 mm $2,131.00
LFR90S Nomar 55 x 90 mm $3,527.00
SW2S 60 mm $4,766.00
Planishing Jaws
TP25S 85/25 mm $1,561.00
Straightening Jaws
RWS 80 x 150 mm (Lower Part) - $5,245.00
RW-TP25S (Upper Part) $691.00
RW-WT80S (Upper Part) $1,153.00
Flattening Jaws
FWS60S 60 mm
-
$2,806.00
LFS60S Nomar 60 mm
$2,921.00 |
|
|
|
|
Eckold
KF170PDK Power Former
The KF170PDK is the smallest
machine in the Kraftformer Series. Unique to this machine is
the fact that the machine is air-operated and can be
switched from a single stroke per pedal activation to a
continuous stroke mode. This is an ideal, low cost, power
unit for fabrication, correcting and adjusting. Standard
equipment includes the FWA405K shrinker and FWR407K
stretcher jaws. $12,120.00
Specifications
Reach x Gap ................................ 7" R x 4" G
Capacity:
Steel ....................................................
0.078
Aluminum ............................................ 0.078
Stainless Steel ...................................... 0.059
Working Height ......................................45"
(Slightly Adjustable) Weight
............................................ 332 lbs.
Shipping Weight .............................. 400 lbs.
Available Jaws
Shrinking Jaws
FWA405K (STD) 40 mm $880.00
FWA602K 60 mm $1,559.00
HSA40K Beaked $2,684.00
HLFA70K Nomar $2,526.00
Stretching Jaws -
FWR407K (STD) 40 mm $880.00
FWR603K 60 mm $1,559.00
HSR60K Beaked $2,648.00
HLFR70K Nomar $2,502.00
Doming Jaws
PFW40K 040/R min .50 $361.00
PFW50K 050/R min .75 $377.00
Speciality Jaws
TP15K 015/15 Planishing Jaws
$319.00
LSW1K Hole Punch $831.00
(note: punch and dies ordered separately,
inquire about sizes)
ASW42K Notching Jaws $1,194.00
DFW1K Clinching Tool Holder (only)
$1.427.00
(inquire regarding rectangular and round inserts)
|
|
GL2-DLX
Eckold Planishing
Hammer Kit
A handy and
economical way to purchase everything offered for the Eckold
Portable Planishing Hammer. It includes the air
hammer, 5 steel insert dies, 5 synthetic inserts, 2 holding
adapters, including a 12 degree swivel adapter, air fittings
and hose. It even has an additional 3 blank synthetic
inserts so you can shape them to meet your special
applications. $2,195.00 |
|
HF100K
Eckold Handformer
Recently upgraded, the
new Eckold HF100 Handformer is designed with a full 4" reach
and 2 1/4" gap and adjustable work stop. The new heavy
duty stand can be adjusted from 33 3/4" up to 44 1/2"
working height and includes two handy storage trays to hold
your tooling. This unit is supplied with the FWA405SSP
shrinker jaw and the FWR407SSP stretcher jaw. Optional
jaws include beaked jaws for working on U channel material,
NO-Mar jaws that don't damage the materials surface, hole
punches, notching tools and more. $3,500.00 |
|
GL2-PDKIT
Planishing Die Kit
The new GL2-PD planishing die kit is a
great addition to the very popular Eckold Planishing Hammer,
(GL2). This "add-on" kit consists of 13 pieces.
(5 new round synthetic inserts in a variety of surface
radii, 2 round flat synthetic inserts for custom shaping and
1, 18mm x 40mm synthetic flat. Also included is a 40mm
x R 50mm and a 48mm x R 70mm steel insert. All the
inserts quickly attach to the 2 adapter shafts, one of which
allows the inserts to swivel up to 12 degrees in any
direction. A handy storage tray is also supplied and
can be easily attached to the GL2 kit tray or to your tool
box, work bench or wall. Please note that this is a
planishing die kit and does not include the air planishing
hammer or any of the accessories supplied with the standard
GL2 kit. $ 950.00 |
|
|
|
