Encapsulated Wire Wheels

Available in a 2" diameter wheel with .0118" diameter wire and a 3" wheel with .008" diameter wire. Both have a 1/4" shank and are rated for a maximum of 20,000 rpm. These brushes are designed for fast and aggressive cleaning while maintaining a long life.
KTC596A 2" Encapsulated Wheel
$20.00
KTC596B 3" Encapsulated Wheel
$26.00

KAT108 - Air Shear

The ergonomic, comfort grip handle with a variable speed trigger makes this tool a joy to use. It has a rotating air inlet and rear exhaust for additional comfort. Cutting capacity is .047" mild steel, runs at 2,600 rpm, 8-1/2" OAL and 1.3 lbs. $99.00

Comfort grip housing with a safety throttle lever, rear exhaust and rotating air inlet.
* 22,000 rpm
* 1/4" collet chuck
* 6-7/16" OAL
* 1-1/3 lbs

$71.00

KAT124 Engraving Pen

Etches on a variety of materials such as steel up to RC-64, glass, plastics and wood. Can be used for removing broken studs. 5" OAL, 5 oz., 1/4" air inlet. $190.00

KTC506 Spare Carbide Tip for KAT124
$8.00

KD200 - Kett Electric Sheet Metal Shear

Double cut shears feed quickly and quietly without warping or bending. Cuts straight or contour lines at 180" per minute. 2500 rpm, 15-1/2" OAL, 7 lbs, takes 120v/50 amp.
$240.00

Replacement Blades:
60-22L Left Blade $19.00
60-21 Center Blade $20.00
60-22R Right Blade $19.00

KAT106 - 30º Angle Die Grinder

Unique 30° angle on the head of this grinder allows easy access in some difficult areas. It has a comfort grip housing lever, safety throttle and rotating air inlet, along with rear exhaust.
* 22,000 rpm
* 1/4" collet chuck
* 7.9" OAL
* 1.4 lbs

$72.00

5978A - Sioux Force Pencil Die Grinder

Supplied with a twist throttle, remote exhaust and built-in speed regulator. The 0.1 hp motor runs the tool at 54,000 rpm. The tool is only 0.25 lbs and 5.3" OAL. It also comes with a 5 foot air hose and 1/8" collet chuck.
$99.00

KAT750 Tab Shear

Easily shear router tabs from aluminum, steel, titanium and stainless steels or perform similar shearing and trimming tasks with this light weight tool. It’s made of 356-T6 aluminum and heat treated, precision ground steel for the demanding use in the aerospace industry. The hard anodized aluminum frame is twice as strong as the competitions in this area and tool steel shear blades can be re-sharpened or rotated to a new cutting edge. It also has large carbide wear faces to protect the frame from wear and damage. $1,125.00

Specifications
Shearing Cap:Steel ..............1/8", 3.17mm
Aluminum .........................1/16", 1.57 mm
Max Thr. Open...18" x 3",3.17mm x 76.2mm
Shearing Force .........4,200 lbs, 1,909 Kilos
Weight ............................ 7 lbs, 3.18 Kilos
Air Inlet ..................................... 1/4" npt
Size .............................9-1/2" L x 6-3/4" H

1DS111 - Sioux Straight Die Grinder

Small lightweight with lots of power, this .33 hp tool has it all. It runs at 25,000 rpm, has a 1/4" collet, rear exhaust, 6" OAL and weighs 0.9 lbs. This is really a nice tool.

$329.00

5300A - Sioux Force Reciprocating Air Saw

Produces over 10,000 strokes per minute for fast, smooth cutting. Will handle straight or scrolled cuts on metal, plastics and wood. Comes with a safety throttle lever and a built in air regulator. 9.2" OAL, 1.8 lbs.
$155.00

Available Blades
(sold in packs of 5)
1823 - 18 TPI $26.00
1824 - 24 TPI $26.00

KTC641 Throatless Shear

This shear will easily handle 14 gauge mild and 18 gauge stainless steel with ease, yet handle lighter metals without distortion. The unique shoulder design allows work to be turned in any direction during the cut, or a continuous cut to any length. The base is pre-drilled for mounting on a stand or work bench. Weight 18 lbs, Height less handle 14", Height with handle 18", Width 9", Depth 10", Length of cut 3-1/8". (Note: larger capacity models available upon request) $705.00

KTC641-1 Spare Shear Blade Set (upper and lower) $125.00

Sioux SDG10525F Signature Series Grinder

High power (.70 hp) and a 25,000 rpm speed combine to make this grinder one of the most popular tools in the Sioux line. It features a safety lock-off lever, all ball bearing construction, built in air regulator, fine wire mesh inlet screen and a steel inlet bushing. The housing has been given a durable powder coating and front exhaust. It comes with a heavy duty, 3 piece double tapered collet. Wt. 1.2 lbs, 6" OAL  $225.00

5980 - Sioux Force Engraving Pen

This vibrating pen cycles at 13,000 cycles per minute. The tool is great for marking identification on your tools and personal property. Comes with a 5 foot flexible air hose. Available replacement carbide tips listed below.
                                       $95.00

506246 - 45° standard tip $39.00
506245 - 30° $39.00
506244 - 15° $39.00

KS221 - Kett Electric Panel Saw

Light duty panel saw will cut up to 1/4" thick plastic, 1/8" aluminum, and 18 gauge mild steel. 2500 rpm, 15-1/2" OAL, 7 lbs, 120v/5 amp.
$435.00

Available Blades:
1-1/4" Dia 157-12 22 Tooth $5.00
1-1/4" Dia 157-14 44 Tooth $5.00
1-1/4" Dia 157-16 60 Tooth $5.00
1-1/2" Dial 157-23 30 Tooth $5.00
1-1/2" Dia 157-24 44 Tooth $5.00
1-1/2" Dia 157-26 60 Tooth $5.00
 

Diamond Router Bits

Diamond router bits will perform a variety of jobs, from trimming fiberglass and composites to routing deep rebates in most laminates. Especially useful in fiberglass and composite repair work. 40-50 grit.

KTC638-1 1/8" x 3/4" x 1/8" x 2" L Dome Diamond Router $28.00
KTC638-2 1/8" x 1" x 1/4" x 2-1/2" L Dome Diamond Router $42.00
KTC638-3 1/8" x 3/16" x 1" x 2-1/2" L Tapered Diamond Router $42.00
KTC638-4 3/16" x 1/2" x 1/4" x 2-1/2" L Dome Diamond Router $42.00
KTC638-5 1/4" x 1" x 1/4" x 2-1/2" L Dome Diamond Router $42.00
KTC638-6 1/4" x 1" x 1/4" x 3" L Dome Diamond Router  $42.00
KTC638-7 1/4" x 1-1/2" x 1/4" x 3" L Dome Diamond Router  $54.00

540ESC -
Sioux Pistol Grip Sander

Very high power, yet compact, this is a super tool to have and use. It has a 1/4" collet chuck, 0.90 hp and runs at 20,000 rpm but it is only 4.4" OAL and weighs just 1.7 lbs.
$180.00

Roloc^TM Sanding Disc - RolocTM TR Style

For general purpose grinding, blending and deburring on all metals. Abrasive is mounted on a heavy duty cloth backing.

1-1/2" Diameter - Max 30,000 rpm
KTC522 60 Grit $0.60
KTC523 80 Grit $0.60
KTC524 100 Grit $0.60
KTC525 120 Grit $0.60

3" Diameter - Max 20,000 rpm
KTC530 60 Grit $0.95
KTC531 80 Grit $0.95
KTC532 100 Grit $0.95
KTC533 120 Grit $0.95

2" Diameter - Max 25,000 rpm
KTC526 60 Grit $0.80
KTC527 80 Grit $0.80
KTC528 100 Grit $0.80
KTC529 120 Grit $0.80

Sioux Right Angle Sander

Small in size yet large in horse power. These industrial quality sanders are among the finest in the industry - both units are variable speed.

1DA221HP - 1/4" collet, 20,000 rpm, rear exhaust, .33 hp, 6" OAL, 1.2 lbs
$389.00
1DA321 - 1/4" collet, 12,000 rpm, rear exhaust, .33 hp, 6" OAL, 1.2 lbs
$399.00

Roloc^TM Backing Pad

KTC519 1-1/2" Backing Pad $16.00
KTC520 2" Backing Pad $17.00
KTC521 3" Backing Pad $19.00
KTC543 Threaded Shaft - Must use with above Backing Pads $4.00

KAT120 - Air Reciprocating Saw

One hand operation makes a difficult job easy. This is a great tool for cutting steel, aluminum, copper, wood or plastics. 9-1/4" OAL, 1.38 lbs., 10,000 rpm, 3/8" stroke. Available spare blades listed below.  $60.00

Available Blades
(sold in packs of 10)
Standard Blade                            Scroll Blade
                   12118 18 TPI $3.00                    12518 18 TPI $3.00                   
          12124 24 TPI $3.00                    12524 24 TPI $3.00         
  12132 32 TPI $3.00                    12532 32 TPI $3.00

KAT103 - Cut Off Tool

Rear exhaust tool with a lever throttle and wheel guard. 20,000 rpm, 8" OAL, 2.8 lbs.
$63.00

KAT121 - Palm Sander

This is a nice, light weight sander with a 5.0 mm orbit and a 5" or 6" pad. It only weighs 1.75 lbs which is really nice for the professional or amateur mechanic. $125.00

KAT122 - with vacuum attachment
$130.00

KAT111 - Reversible Cut Off Tool Kit

This cut off tool is truly unique by being reversible. This allows the operator to control the direction of the sparks when cutting, left or right, front or rear. It has a rotating air inlet, wheel guard and a safety throttle lever. This is really a great tool to use. The kit includes the grinder, 10-3" cutting disks, safety glasses and wrenches, all in a handy carrying case. 18,000 rpm, 7-11/16" OAL, 2-1/2 lbs. $105.00

Pneumatic Belt Sander

Three models of portable Pneumatic Belt Sanders are available to fit your needs.
Each one has a handle that will rotate 360 degrees enabling it to reach into hard to
 reach areas such as in corners or on spherical surfaces. Belts can be changed in just seconds
 

Replacement Belts
KTC639-1 60 Grit 3/8" x 13" $1.00
KTC639-2 80 Grit 3/8" x 13" $1.00
KTC639-3 120 Grit 3/8" x 13" $1.00
KTC639-4 60 Grit 3/4" x 20-1/2" $1.30
KTC639-5 80 Grit 3/4" x 20-1/2" $1.30
KTC639-6 120 Grit 3/4" x 20-1/2" $1.30
KTC639-7 60 Grit 13/16" x 21-1/4"
$2.00
KTC639-8 80 Grit 13/16" x 21-1/4"
$2.00
KTC639-9 120 Grit 13/16" x 21-1/4"
$2.00

Scotch-Brite™ Roloc Discs - Roloc™ TR Style

Premium Scotch-BriteTM surface conditioning non-woven web provides a burr-free decorative finish. Removes grind marks

1-1/2" Diameter Max 30,000 rpm
KTC534 Coarse $0.85
KTC535 Medium $1.00
KTC536 Fine $1.00

3" Diameter Max 18,000 rpm
KTC540 Coarse $2.00
KTC541 Medium $2.00
KTC542 Fine $3.00

2" Diameter Max 25,000 rpm
KTC537 Coarse $1.10
KTC538 Medium $1.10
KTC539 Fine $1.10

KTC639 - Sanding Block Kit

6 blocks, of 3 different firmness densities, which allows them to be distorted or compressed into areas that are difficult to sand. They can also be used as a standard, flat sanding block. Ideally used with 2-3/4" x 5" adhesive back sand paper, but can be used with non-adhesive wet or dry paper. Very lightweight and fatigue free.
$46.00

RO2512-50 SNP - Sioux Random Orbital Sander

Hands down, this is the most comfortable sander ever made. The unique design of the grip allows the soft asymmetrical head to rotate at the most comfortable position for the operator. It will fit any hand shape or size. This tool has a 5" pad diameter and a standard 3/16" orbit. It’s .25 hp gives the tool 12,000 rpm free speed and a sound level of 81 DBA. It is 3.26" high and only 1.5 lbs $220.00

KAT123 - Air Router

This mini based, hand held router has a powerful 1 hp motor and front exhaust. The 6-3/4 OAL and 2-1/2 lbs makes this a great tool for one handed operation. Running at 18,000 rpm, this is an ideal tool for cutting or trimming metals, plastics, woods, fiberglass and laminates. Router guides are not supplied with tool and must be ordered separately. $299.00

IR301-32MK -
Angle Grinder Prep Kit

The prep kit includes a 20,000 rpm right angle die grinder with a 1/4" collet chuck. It also includes a 3M Roloc quick change, 2" and 3" prep pad holders, 2" and 3" prep pads and a carrying case. $145.00

CP7201P - Mini Polishing Kit

Compact and light weight, this tool comes with a .25 hp motor with a built in speed regulator, 2500 rpm free speed. It is 4-1/2" long and 1-1/2 lbs. The kit includes one 3" backing pad, one 3-1/2" wool polishing pad, two 3-1/2" foam compounding pads (1 yellow, 1 white) a spindle key and a carrying case.
$145.00

KAT141 - Air Nibbler

This great little nibbler has a 18 gauge capacity and operates at 2,600 strokes per minute. The punch is easily replaced when needed and the die will rotate to 4 different cutting positions. It only requires 4 cfm air, is just 7” long and weighs only 3.25 lbs. $115.00

KTC640-1 - Replacement Punch
$13.00
KTC640-2 - Replacement Die
$45.00

SRT10S25N - Sioux Air Router

The Sioux SRT10S25N air router is a 1 hp tool that features a heavy duty, three piece double tapered collet that delivers both speed and accuracy with a free speed range of 25,000 rpm. The contoured throttle lever with lock, gives the operator simple, one hand operation on the ergonomically designed, composite handle, with soft cushion grip. 25,000 rpm, 2.06 lbs, 9" OAL, 1/4" collet. Note: Templates must be ordered separately.
$295.00

KAT102 - Pinstripe Removal Tool

Quickly and cleanly removes pin stripes from painted or unpainted surfaces. Operates at 4000 rpm to drive the 3-1/2" pad. 8.9" OAL and 2.1 lbs. $80.00

KAT107K - Utility Inline Driver Kit

This kit is designed to easily remove pin stripes, adhesives, corrosion, vinyl decals, etc. without damaging the surrounding surfaces. It includes the air tool with a safely throttle, and an ergonomic comfort grip housing. It also includes 2 rubber erasers, wheel adapters and 6 strip wheels. Everything is packaged in a handy storage carrying case. $260.00

Accessories:
KAT107-1 Adaptor for rubber eraser or brush
$14.00
KAT107-2 Adaptor for 11mm brush
$16.00
KAT107-3 Rubber eraser $16.00
KAT107-4 11mm fine wire brush
$14.00
KAT107-5 23mm fine wire brush
$14.00
KAT107-6 11mm coarse wire brush
$14.00
KAT107-7 23mm coarse wire brush
$14.00

IR325 - Air Nibbler

Will handle steel, plastic, aluminum up to 18 gauge thick and will not distort the edges. Will hold a tight 1/4" radius with great accuracy. Very easy to operate and control. Will cut 6 per minute. 7.3" OAL $195.00

3M SR Radial Bristle Disc

Fast sealant removal without affecting the underlying paint or surface. The unique bristle fingers conform to various shapes and will easily remove up to 1/16" of sealants, silicones, RTV’S and adhesives from most surfaces. Ideal for cleaning the sealants around rivets and fasteners as well as panel seam sealants.

KTC545 2" x 3/8" 20,000 rpm max, 12,000 rpm recommended $4.00
KTC546 3" x 3/8" 20,000 rpm max, 12,000 rpm recommended $6.00

Rivet Hole Brush

Our 1/2" diameter, piloted stainless steel brushes are designed to clean paint and corrosion from the rivet hole area prior to riveting. This assures good rivet to metal contact and eliminates the build-up of static electricity. They are available with 3/32" to 1/4" pilots, have 1/4" shanks and a .005" wire diameter. Rated at 20,000 rpm max.

KTC595A - 3/32" Rivet Hole Brush  $22.00
KTC595B - 1/8" Rivet Hole Brush   $22.00
KTC595C - 5/32" Rivet Hole Brush  $22.00
KTC595D - 3/16" Rivet Hole Brush  $22.00
KTC595E - 1/4" Rivet Hole Brush  $22.00
KTC595K - Kit of all 5 Brushes  $100.00

1446ES - Sioux Air Shear

This high powered shear has a 18 gauge cold rolled steel capacity and a soft grip ergonomically designed handle. Rated at .90 hp, 2.9 lbs and 8" OAL $479.00