Metal Forming Tools 

KTC100-12 & KTC100-24 Stationary Planishing Hammers




Speed up fabrication time on complex multi form aluminum and steel panels. This tool is ideal for making those impossible to find replacement parts as well as making your own custom designs. The hammer hits at 4,600 blows per minute @ 90 psi air pressure. Available in either a 12" or 24" reach unit, both have an easy to use load force adjuster which makes changing the anvils a breeze. Simply mount it to a bench or stand and use the supplied foot pedal to operate, freeing up your hands to control the parts. Both models come with 9 radius anvils. One each: flat, 3/4", 1-1/2", 2", 3",4", 6", 8" and 12".

KTC100-12 $950.00
  KTC100-24 $1,198.00
 

Available Lower Anvils KTC100-1    Flat                 $70.00 KTC100-2    3/4" Radius      $70.00 KTC100-3    1-1/2" Radius   $70.00 KTC100-4    2" Radius         $70.00 KTC100-5    3" Radius         $70.00 KTC100-6    4" Radius         $70.00 KTC100-7    6" Radius         $70.00 KTC100-8    8" Radius         $70.00 KTC100-9   12" Radius        $70.00

  Power Bead Rollers



These are the best bead rollers money can buy. They are available with a 24", 36" or 42" throat, electrically driven and controlled by a variable speed foot pedal and a forward/ reverse switch. All models come with your choice of one set of standard shape rolls. The 24, 36 and 42 rollers are designed to handle up to .040" mild steel and .050" aluminum.
KTC110-24 $795.00
KTC110-36 $995.00
    KTC110-42 $1,235.00

Larger bead rollers available with capacity up to .075" steel capacity - inquire.

Avail Bead Roll Sets For Use With
 KTC110-24 KTC110-36
KTC110-42

KTC 102
 Bench English Wheel



An economical wheeling machine designed to reproduce or duplicate original body parts or repair panels. The deep 26-1/2" throat and 2" wide anvils allow working to the center of a 50" panel. The machine is perfect for small jobs from motor cycle gas tanks to race car body parts or metal art work. The unit works great as an entry level machine or for small production. It’s an economical way to learn the art of metal wheeling. Designed to bolt on a work bench or order optional floor stand.
Shipped with Six 2-1/2" diameter x 2" wide anvil rolls
KTC102- $1,699.00
 

Specifications Reach x Gap       26 1/2" Reach x 24" G Upper Wheel      7" x 2" Frame                3" x 3" x 1/4" Tubing Heavy Duty kick wheel and a built in anvil roll holder Weight              125 lbs Shipped Motor  Freight Collect

Available Anvils KTC102-1 Flat                                   $99.00 KTC102-2  12" Radius w/ 3/4" Flat     $99.00 KTC102-3  8-1/2" Radius w/ 1/2" Flat $99.00

Optional KTC102-Stand   Floor Stand            $360.00 KTC102-4  5" Radius w/ 3/8" Flat      $99.00 KTC102-5 3-1/4" Radius w/ 1/4" Flat $99.00 KTC102-6 2-3/8" Radius w/ 1/8" Flat $99.00

Bead Roller Stand

Two piece gusseted design for easy shipping and extra strength. Industrial coated finish.
KTC110-52 Stand for 24" bead roller  $99.00
 KTC110-53 Stand for 36" bead roller $125.00

Roll Holder
This handy item slips over our bead roller stand and gives you a perfect place to store up to 10 sets of rolls.
KTC110-54 Roll Holder $99.00

Depth Stop
KTC110-55 Fits all our bead rollers (24", 36" and 42") $99.00

KTC615
English Wheel



The huge 44" reach, on a heavy duty welded frame, allows you to roll hoods, doors, roofs, fenders or any other large job with little or no concern about the size. Yet, it is still capable of doing smaller jobs like bike fenders, gas tanks or scoops. It comes with 6 lower anvil wheels, 1 large upper wheel, and is mounted on 3" heavy duty casters enabling the unit to be moved out of the way when not in use. 450 lbs. $3,999.00

KTC112 Rotary Machine

KTC113  Hand Notcher  Made of cast iron and capable of notching virtually any shearable material. Can notch angles of more than 90 degrees through a two-step process. Comes with an easy to read front gauge and a heavy duty cutting blade. Specifications Cutting Capacity 16 Gauge Piercing Capacity 18 Gauge Maximum Notch 7" Stroke 3/4" Overall dimensions 24" x 21" x 26" Net Weight 66 lbs. $895.00

Optional Accessories
KTC114 This optional hand notcher floor stand has heavy duty construction with a
bottom shelf for convenient storage KTC114 $300.00

KTC 103
Quickshaper Mark II




The new Quickshaper Mark II combines a 32" Reach English Wheel and multiple other work stations. Provisions are available for:
1. Hammering/Blocking, to pre-form and shape custom aluminum or mild steel parts.
2. Wheeling and raising metal panels.
3. Shrinking and Stretching.
4. Planishing: which is ideal for small to medium sized parts like motor cycle tanks, hood scoops, fender flares and door skins.
The unit comes complete with six anvil wheels, shot bag, shrinker, single set stretcher jaws, and one forming head. The forming head comes “rough cast” so you can polish it as you require. Shipped with casters off the machine. Customer is required to put them on. Two optional anvils are also available.
$4,999.00

Specifications
Capacity                      16 ga. Mild Steel
Capacity                      0.125 Aluminum
Height                         60-3/8"
STD. Working Height   47"
Width                          51-1/4"
Depth                          55"
Max Opening Between Anvil       1"
Weight                        470 lbs (approx)
Shipped Motor Freight Collect

Optional Accessories
KTC103-1 #6 Edging Anvil - For surface clean up directly next to a bend or flange. 3/4" wide flat with a 1/16" radius on edge.  $99.00

KTC103-2 #7 Deep Reach Anvil - Great for turning an edge or working in tight confined areas like the end of a tear drop blister. $99.00

KTC115-24 & KTC115-36
Slip Rolls  

	KTC115-24	KTC115-36	KTC115-50
Mild Steel Cap	20 Gauge	22 Gauge	16 Gauge
Max. Forming Length	24"	36"	50"
Diameter of Rolls	2"	2"	3"
Min. Forming Radius	1"	1"	2"
Wire Grooves	3/16", 1/4", 5/16"	3/16", 1/4", 5/16"	1/4", 5/16", 3/8"
Overall Dimensions	37" x 17" x 17"	49" x 17" x 17"	68" x 22" x 24"
Net Weight	172 lbs	212 lbs	512 lbs
Shipped Freight Collect
Optional Slip Roll Stands KTC115-24-1        Stand For 24"  $225.00 KTC115-36-1        Stand for 36"    $300.00 KTC115-50-1        Stand for 50"    $325.00
These floor stands are made with heavy duty construction and include a lower shelf for convenient storage.

Box and Pan Brake


Use all the fingers for a full length, straight bend or remove and combine fingers for custom bends.
 A total of 16 assorted fingers are supplied.

Optional Accessories
KTC116 Floor stand fits both of the above 48" brakes. Made of heavy
duty material and has a lower shelf for storage. $305.00

KTC120
Manual Bench Press


Made of a rugged welded plate construction - 3 ton capacity. Uses industry standard punch & dies for round, square and oblong holes, or with special dies for shearing, punching, 90 degree bends or louvering up to 5" and punch and flare operations. Can also be used as an arbor press. Maximum tooling capacity is 3" diameter punch and flare and 16 gauge mild steel.
KTC120 - $650.00

Optional Punch and Flare Tools

KTC101 Ultimate Box and  Pan Brake  

This 48" 16 gauge brake has a unique “3-finger” design that incorporates moveable fingers on the bed and apron, as well as the usual upper fingers. This design allows the operator to make bend combinations that, before, were extremely difficult, if not impossible. An example is a compound bend made in the center of a sheet. The model KTC101 has a tool-less upper set back adjustment and is designed to bend 16 gauge mild steel the full width with the included apron leaf angle fingers. Comes with 1 each of 1", 2", 3", 6" and 3 of the 12" bed fingers. Also included are 1 each of 1", 2", 3", 6", 12" and 24" apron (leaf) angles and 1 each of 1", 2", 3" and 7 of 6" upper fingers.

Specifications Capacity Mild Steel            16 gauge Stainless Steel                    20 gauge Aluminum                          12 gauge Bending Length                 48" w/ 49" of clearance Max. Box Depth                 3-1/2" Max Lift of Beam                 1-1/2" Front to Rear Adjustment   1" Minimum Reverse Bend      1/4" Shipping Weight                550 lbs Shipped Freight Collect

$3,700.00

Optional Accessories

Apron Fingers Kits (Leaf)
KTC101-1A 1/4" Finger Kit
Consists of 1", 2", 3" and 6" Wide Fingers $250.00

KTC101-2A 1/2" Finger Kit
Consists of 1", 2", 3" and 6" Wide Fingers $250.00
Floor Stand
KTC101-1 Floor Stand
Upper Radius Finger Kit
(Radius measured from inside of bend) $375.00
KTC101-3A 1/8" Finger Kit
Consists of 1", 2", 3" and 6" Wide Fingers $300.00

KTC101-4A 3/16" Finger Kit
Consists of 1", 2", 3" and 6" Wide Fingers $300.00

Upper Radius Finger Kit
(Radius measured from inside of bend)
KTC101-5A 1/4" Finger Kit
Consists of 1", 2", 3" and 6" Wide Fingers $300.00
KTC101-6A 5/16" Finger Kit
Consists of 1", 2", 3" and 6" Wide Fingers $300.00

Notcher Die Sets 
sKTC105-3            1" O.D.  $150.00
KTC105-4      1-1/8" O.D.   $150.00
KTC105-5      1-1/4" O.D.   $150.00
KTC105-6      1-3/8" O.D.   $150.00
KTC105-7      1-1/2" O.D.   $150.00
KTC105-8      1-5/8" O.D.   $150.00
KTC105-9      1-3/4" O.D.   $150.00
KTC105-10          2" O.D.  $150.00

Hydraulics
KTC105-2 Air Hydraulic Pump, Hose & Fitting
$825.00

 KTC117-12
Heavy Duty Box and Pan Brake

KTC106 Hole Saw Notcher


This hole saw notcher is easy, quick, accurate and affordable. It easily sets to the exact angles required (0 - 60 degrees), and automatically centers the tube and notches from 3/4" to 2" diameter. Power for the notcher is supplied by a drill press or hand drill. Hole saws purchased separately.
KTC106 $375.00
 

Available Hole Saws KTC106-1     3/4"    $20.00 KTC106-2     1"       $20.00 KTC106-3     1-1/4" $20.00 KTC106-4     1-3/8" $20.00 KTC106-5     1-1/2" $20.00 KTC106-6     1-5/8" $22.00 KTC106-7     1-3/4" $25.00

KTC118-36
Foot Shear



 

Ideal for precision shearing of mild steel up to 16 gauge,
plus aluminum, brass, copper, plastics etc.
 

KTC107
Notch & Bend Aligner



End material waste and slow trial and error fabrication. This great accessory assures precise axial alignment of notches and bends. Add the finishing touch to your ultimate notcher and your bender.
KTC107- $240.00



KTC107-1
Smart Tool Angle Sensor




KTC107-1 Smart Tool digitally reads all angles in degrees, % slope and pitch. It beeps at level and plumb and has a push button recalibration.
KTC107-1 $155.00

KTC119
Combination Shear, Brake and Roll

             

One machine does it all - adapts for left or right hand operation. Shears mild steel, aluminum, brass, copper,
plastics etc. Brake is equipped with easily removable fingers for custom bends.
The slip rolls are precision turned and ground with wire grooves.


Specifications
Shearing Capacity 20 Gauge x 30"
Bend Capacity 20 Gauge x 30"
Rolling Capacity 20 Gauge x 30"
Size of Rollers 30" x 1-1/2"
Fingers Sizes 1 each of: 1", 2", 3", 6", 8", 10"
Upper Die Height 4-3/8"
Min Forming Radius 3/4"
Wire Grooves in Rolls 1/8", 3/16", 1/4"
Overall Diameter 42-1/2" x 21-1/2" x 28"
Weight 320 lbs
Shipped Freight Collect
$995.00

Optional Accessories
KTC119-1 Optional floor stand for 30" combination shear, brake and roll
KTC119-1 $240.00

Round Tube Shoe Sets
KTC108-1       1" Tube 3-1/2" CL Radius
$280.00
KTC108-2    7/8" Tube 3-1/2" CL Radius
$280.00
KTC108-3  3/4" Tube 2-1/2" CL Radius
$280.00
KTC108-4  5/8" Tube 2-1/2" CL Radius
$280.00
KTC108-5 /2" Tube 2" CL Radius
$280.00
Combo Set
KTC108-6 3/8" & 1/2" Tube 2" CL Radius
$280.00

Square Tube Shoe Sets
KTC108-7    1" Tube 3-1/2" CL Radius
$280.00
KTC108-8    7/8" Tube 3-1/2" CL Radius
$280.00
KTC108-9   3/4" Tube 2-1/2" CL Radius
$280.00
KTC108-10  5/8" Tube 2-1/2" CL Radius
$280.00
KTC108-11  1/2" Tube 2" CL Radius
$280.00
Combo Set
KTC108-12  3/8" & 1/2" Tube 2" CL Radius
$280.00

KTC111
Power Shrinker-Stretcher


Small and economical, this power shrinker and stretcher could be the answer to many simple problems. The units are mounted on a rugged, welded and coated frame with an air cylinder, built-in speed control and quick release pin for an easy switch over from one task to another The unit is controlled with a 3-way foot pedal giving a single stroke for each step on the pedal. Capacity 0.059" Steel $795.00